SewingCalc

Free · runs in your browser

Circle Skirt Calculator

Type your waist and the length you want, and get the waist radius, the hem radius, a to-scale panel layout for your cloth width, and a 1:1 paper pattern you can print.

cm & inches Four skirt shapes Runs in your browser

The calculator opens right here, with your measurements staying in your own browser. If it does not show up, open the calculator in its own tab.

What the calculator actually works out

A circle skirt has no side seams shaping it. The whole silhouette comes from one curve at the waist, so the number you cut from is a radius — and everything else follows from it: where the waist seam sits, where the cutting line goes, how far the hem falls, and how much cloth disappears before a single panel is laid down.

You give the calculator three things: your waist, the finished skirt length you want, and how the skirt closes. It gives back four radii — waist seam, waist cutting line, finished hem and hem cutting line — plus hem circumference, the finished waist opening, and the fabric length worked out from a real panel layout on the cloth width you actually have.

Choosing the sweep before you choose the numbers

Sweep is how much of a circle the skirt uses. A full circle (360°) gives the deepest folds and the most dramatic hang; three-quarter (270°) is a little quieter; half circle (180°) is the everyday skirt most people sew first; quarter circle (90°) sits close like an A-line. The same waist produces a very different radius depending on the sweep, so decide the shape first, then take the numbers.

Three inputs, and the ones people forget

Waist is your body measurement, taken at the height you want the waistband to sit. Add wearing ease separately: zero gives a close fit, and 2–5 cm is normal for a skirt worn over a tucked-in shirt.

Length runs from the waist seam to the finished hem and does not include a waistband. If you want a 55 cm skirt and plan a 4 cm band, ask for 51 cm of skirt.

Closure changes the arithmetic more than people expect. A zip or button placket lets the waist opening stay close to the body. An elastic waist has to pass over your hips, so the opening is cut wider; the calculator widens it for you and then tells you whether that elastic loop reaches your hip measurement.

Fields you can safely leave alone: a waistband width of zero means no separate band, and a side seam allowance of 1.5 cm is pre-filled because that is what most home patterns assume.

Why the panel layout matters more than the formula

The waist radius formula is three lines long — short enough to write on an envelope. What decides whether your afternoon goes well is the layout. A circle skirt is cut as one, two or four panels; panels have to be turned end to end to fit across the cloth; and the amount of fabric you need changes completely between 115 cm and 150 cm goods.

The calculator lays the panels out to scale, alternating each one by 180 degrees the way you would really cut them, reserves the side seam allowance across the width, and rounds the fabric length up. Rounding up is deliberate: fabric is sold in fixed increments, and a length cut short means a second trip.

Cutting line, seam line, and why you need both

Four radii sound like more than you need until you are standing over the fabric with chalk. The seam line is where the fabric finally lives. The cutting line is that line plus the allowance you entered. Cut on the cutting line, stitch on the seam line, and the finished skirt measures the length you planned, provided the allowances match how you sew it.

The same pair exists at the hem: the finished hem radius, and the hem cutting radius, larger by the total turn-in you plan. Two 1 cm folds need 2 cm; a bias facing needs less.

Printing one panel at full size

One panel printed at 100% is enough, because you cut it as many times as the layout says. The print output tiles the panel across A4 or US Letter with alignment marks and a test square of 5 cm and 2 inches on the first page. Measure that square with a ruler before printing the rest, and set your printer to 100% or Actual size rather than fit-to-page, which quietly shrinks by a few percent and ruins a waist that has to close.

Three checks before the scissors come out

Re-measure your waist once more, then run the checks the results panel spells out: does the panel layout fit your fabric width, does the elastic loop reach your hip measurement, and is the length you chose the length you want when you sit down. If one fails, change one thing at a time — the sweep, the panel count, or the width of the cloth.

When the numbers are in, the circle skirt formula page walks through the arithmetic by hand with a waist-to-radius chart, the hemming guide covers the drop that catches everyone out on a bias-cut hem, and the closure guide settles zip versus elastic. Most other questions are answered on the circle skirt FAQ.

Circle skirt questions we get most

How much fabric do I need for a circle skirt?

It depends on the sweep of the skirt, your length and how wide the cloth is. A full circle in 28″ waist and 22″ length takes roughly 1.5 yards of 60″ fabric laid as four panels; the same skirt on 45″ cloth needs about 2.25 yards. Half circle and quarter circle use much less. The calculator works this out from an actual panel layout rather than a rule of thumb, so the figure reflects how the panels actually fit the cloth you are buying.

Do I need to add seam allowances myself?

No. You enter your waist allowance, side seam allowance and hem turn-in once, and the calculator hands back both the seam line and the cutting line for the waist and the hem — the cutting line already includes the allowances.

How do I type 27 1/2 or 5/8 in the waist field?

Exactly like a tape measure reads it: 27 1/2, 27-1/2 or 27.5 all work, and bare fractions such as 5/8 are accepted too. Choose inches at the top of the form first.

Will an elastic waist fit over my hips?

The calculator widens the opening for you, then checks the elastic loop against your hips. Switch the closure to elastic, enter your hip measurement, and the result panel tells you whether the loop reaches your hip measurement with an assumed 50% stretch — test your own elastic before cutting, because widths behave very differently.

Does 115 cm fabric behave the same as 150 cm?

No, and the difference is often a whole extra length. Narrow cloth fits fewer panels across the width, so more panels have to sit end to end down the length. Set the fabric width to 115 or 150 and compare the two fabric amounts before you buy.

Can I print a real pattern piece?

Yes. The print button produces one full-size panel on A4 or US Letter, tiled across pages with alignment marks and a 5 cm / 2 in test square. Print the first page, measure the square, and only continue if it is exact.

Was this useful?

0 people saved this

Ask about your own skirt